korrigo-fi-92860d95b370c6 — Source Data Validation Report

block_trips_with_overlapping_stop_times

Trips with the same block id have overlapping stop times.

You can see more about this notice here.

Only the first 50 of 204 affected records are displayed below.

equal_shape_distance_diff_coordinates

Two consecutive points have equal shape_dist_traveled and different lat/lon coordinates in shapes.txt and the distance between the two points is greater than the 1.11m.

When sorted by shape.shape_pt_sequence, the values for shape_dist_traveled must increase along a shape. Two consecutive points with equal values for shape_dist_traveled and different coordinates indicate an error.

You can see more about this notice here.

Only the first 50 of 5192 affected records are displayed below.

point_near_origin

A point is too close to origin (0, 0).

You can see more about this notice here.

Only the first 50 of 51 affected records are displayed below.

stop_time_with_arrival_before_previous_departure_time

Backwards time travel between stops in stop_times.txt

For a given trip_id, the arrival_time of (n+1)-th stoptime in sequence must not precede the departure_time of n-th stoptime in sequence in stop_times.txt.

You can see more about this notice here.

Only the first 50 of 59 affected records are displayed below.

duplicate_route_name

Two distinct routes have either the same route_short_name, the same route_long_name, or the same combination of route_short_name and route_long_name.

All routes of the same route_type with the same agency_id should have unique combinations of route_short_name and route_long_name.

Note that there may be valid cases where routes have the same short and long name, e.g., if they serve different areas. However, different directions must be modeled as the same route.

Example of bad data:

You can see more about this notice here.

equal_shape_distance_diff_coordinates_distance_below_threshold

Two consecutive points have equal shape_dist_traveled and different lat/lon coordinates in shapes.txt and the distance between the two points is greater than 0 but less than 1.11m.

When sorted by shape.shape_pt_sequence, the values for shape_dist_traveled must increase along a shape. Two consecutive points with equal values for shape_dist_traveled and small difference of coordinates (greater than 0 but less than 1.11 m distance) result in a warning.

You can see more about this notice here.

Only the first 50 of 48898 affected records are displayed below.

fast_travel_between_consecutive_stops

A transit vehicle moves too fast between two consecutive stops.

The speed threshold depends on route type:

You can see more about this notice here.

Only the first 50 of 218 affected records are displayed below.

fast_travel_between_far_stops

A transit vehicle moves too fast between two far stops.

Two stops are considered "far" if they are more than 10 km apart. This normally indicates a more serious problem than too fast travel between consecutive stops.

The speed threshold depends on route type and are the same as fast_travel_between_consecutive_stops.

You can see more about this notice here.

Only the first 50 of 75 affected records are displayed below.

leading_or_trailing_whitespaces

The value in CSV file has leading or trailing whitespaces.

This notice is emitted for values protected with double quotes since whitespaces for non-protected values are trimmed automatically by CSV parser.

The validator strips whitespaces from protected values. We do not see any use case when such a whitespace may be needed. On the other hand, some real-world feeds use trailing whitespaces for some values and omit them for the others. This is causing the largest problem when a primary key and a foreign key differ just by a whitespace: it is clear that they are intended to be the same, that is why we always strip whitespaces.

You can see more about this notice here.

missing_bike_allowance

Ferry trips should include bike allowance information.

All ferry trips should have a valid value in the bikes_allowed field in trips.txt.

You can see more about this notice here.

Only the first 50 of 6685 affected records are displayed below.

missing_feed_contact_email_and_url

Best Practices for feed_info.txt suggest providing at least one of feed_contact_email and feed_contact_url.

You can see more about this notice here.

missing_timepoint_value

stop_times.timepoint value is missing for a record.

When at least one of stop_times.arrival_time or stop_times.departure_time are provided, stop_times.timepoint should be defined

You can see more about this notice here.

Only the first 50 of 100000 affected records are displayed below.

mixed_case_recommended_field

This field has customer-facing text and should use Mixed Case (should contain upper and lower case letters).

This field contains customer-facing text and should use Mixed Case (upper and lower case letters) to ensure good readability when displayed to riders. Avoid the use of abbreviations throughout the feed (e.g. St. for Street) unless a location is called by its abbreviated name (e.g. “JFK Airport”). Abbreviations may be problematic for accessibility by screen reader software and voice user interfaces.

You can see more about this notice here.

Only the first 50 of 161 affected records are displayed below.

non_ascii_or_non_printable_char

Non ascii or non printable char in ID field.

A value of a field with type ID contains non ASCII or non printable characters. This is not recommended.

You can see more about this notice here.

route_color_contrast

Insufficient route color contrast.

A route's color and route_text_color should be contrasting.

You can see more about this notice here.

route_long_name_contains_short_name

Long name should not contain short name for a single route.

In routes.txt, route_long_name should not contain the value for route_short_name, because when both are provided, they are often combined by transit applications. Note that only one of the two fields is required. If there is no short name used for a route, use route_long_name only.

Good examples:

Bad examples:

You can see more about this notice here.

route_short_name_too_long

Short name of a route is too long (more than 12 characters).

You can see more about this notice here.

stop_has_too_many_matches_for_shape

Stop entry that has many potential matches to the trip's path of travel, as defined by the shape entry in shapes.txt.

This potentially indicates a problem with the location of the stop or the path of the shape.

You can see more about this notice here.

Only the first 50 of 484 affected records are displayed below.

stop_too_far_from_shape

Stop too far from trip shape.

Per GTFS Best Practices, route alignments (in shapes.txt) should be within 100 meters of stop locations which a trip serves. This potentially indicates a problem with the location of the stop or the path of the shape.

You can see more about this notice here.

Only the first 50 of 135 affected records are displayed below.

stop_without_stop_time

A stop in stops.txt is not referenced by any stop_times.stop_id.

Such stops are not used by any trip and normally do not provide user value. This notice may indicate a typo in stop_times.txt.

You can see more about this notice here.

stops_match_shape_out_of_order

Two stop entries are different than their arrival-departure order defined by shapes.txt.

This could indicate a problem with the location of the stops, the path of the shape, or the sequence of the stops for their trip.

You can see more about this notice here.

unexpected_enum_value

An enum has an unexpected value.

You can see more about this notice here.

Only the first 50 of 199 affected records are displayed below.